Tesla Model 3 Highland Front Bumper Covers & Parts
MapleV stocks 17 front bumper covers & parts for the Tesla Model 3 Highland (2024+), cross-referenced to Tesla OE numbers, stocked at our Metro Vancouver warehouse and shipped to Tesla owners and collision shops in every province.
Standard or Performance front bumper?
The 2024+ Model 3 Highland uses a different front bumper for the Performance trim. Match your trim before ordering.
- Standard upper fascia — Tesla OE 2013442-S0-G. Main upper front bumper cover for the standard Highland.
- Performance upper fascia — Tesla OE 2013441-S0-F. Upper cover for the Performance trim — a different mould from standard.
- Performance lower fascia — Tesla OE 1818924-00-E. Separate lower section on the Performance trim; often kerb-scuffed.
The Highland Performance uses a two-piece (upper + lower) front bumper. Confirm your trim and the OE before ordering.
Delivery — across Canada and Metro Vancouver
Ships to any address in Canada by ground courier: about 2 business days to Alberta and Saskatchewan, 3 to Manitoba, 5 to Ontario and Quebec (business days, not counting weekends).
Same-day and next-day delivery across Metro Vancouver and the Fraser Valley — order by 11 AM for same-day. Local delivery is free on orders over $300 after discounts ($500 with a bumper cover).
Warranty
Limited Lifetime Warranty against defects in material and workmanship on the vehicle the part is first installed on, for as long as the owner at installation keeps that vehicle. Full terms: warranty policy.
Front Bumper Covers & Parts (17)
- Front Bumper Upper Fascia Unpainted — Tesla OE 2013442-S0-G — Aftermarket · $339
- Front Bumper Upper Fascia Unpainted (With Logo) — Tesla OE 2013442-S0-G — Aftermarket · $339
- Front Bumper Side Bracket - Left — Tesla OE 1774268-00-E — Aftermarket · $19
- Front Bumper Side Bracket - Right — Tesla OE 1774269-00-E — Aftermarket · $19
- Front Bumper Center Bracket - Left — Tesla OE 1734299-00-H — Aftermarket · $9
- Front Bumper Center Bracket - Right — Tesla OE 1734300-00-H — Aftermarket · $9
- Tow Hook Cover — Tesla OE 1694316-00-E — Aftermarket · $29
- Ankle Catcher — Tesla OE 1694328-00-D — Aftermarket · $69
- Ankle Catcher Bracket - Left — Tesla OE 1694328-00-D — Aftermarket · $49
- Ankle Catcher Bracket - Right — Tesla OE 1694328-00-D — Aftermarket · $49
- Bumper Beam Foam — Tesla OE 1741046-00-G — Aftermarket · $99
- Front Bumper Upper Fascia Unpainted (Performance) — Tesla OE 2013441-S0-F — Aftermarket · $339
- Front Bumper Lower Fascia (Performance) — Tesla OE 1818924-00-E — Aftermarket · $249
- Ankle Catcher (Performance) — Tesla OE 1772362-00-E — Aftermarket · $159
- Crush Can Front Subframe — Tesla OE 1109193-00-C — Aftermarket · $79
- Crush Can - Left — Tesla OE 1683943-00-E — Aftermarket · $79
- Crush Can - Right — Tesla OE 1683942-00-F — Aftermarket · $79
Frequently asked
Is the Highland front bumper the same as the older Model 3?
No. The 2024+ Model 3 Highland has a different front end and different parts from the 2017–2023 Model 3. This page covers the Highland; use the earlier Model 3 page for pre-2024 cars.
Do I need the Standard or the Performance front bumper?
Match your trim. The Performance trim uses a different upper fascia (OE 2013441-S0-F) plus a separate lower section (OE 1818924-00-E); the standard trim uses OE 2013442-S0-G. Confirm the OE against your VIN before ordering.
Does it come painted to my car's colour?
No. It ships for your body shop to prep, fit and finish to your exact colour.
How much does a Model 3 Highland front bumper replacement cost?
The unpainted upper cover is $339 here. Tesla's flat-rate time to fit a new cover on the 2024+ Model 3 is 0.90 hour (correction code 1001020042), or 0.42 hour to remove and refit the same one (code 1001020041), as published in October 2026. Paint and any broken small parts are extra. Our front bumper replacement cost guide breaks down the estimate.
How is the Highland front bumper cover removed and replaced?
Tesla's procedure for the 2024+ Model 3 first takes out the underhood storage unit (the frunk). Then come five bolts along the top of the cover, the wheel-arch liner clips, one bolt at each fender and four valance bolts. On cars built after August 27, 2025, two more bolts hold the cover to the ankle catcher. It unplugs the camera washer hose where fitted and the fascia connectors, and releases 16 clips. On a new cover, the fascia harness, the valance, the grille and eight B-nuts move across, and the front camera, where fitted, is reconnected. Tesla allows 0.42 hour to remove and refit, 0.90 hour with a new cover.
Does the Model 3 Highland front bumper have a camera?
It can. Tesla's owner's manual for the 2024+ Model 3 says a camera is mounted above the grille on the front bumper, if equipped, with its own washer nozzle. If your car has one, Tesla's procedure reconnects it on the new cover. The manual also says a camera that has moved from its calibrated position needs the calibration cleared and redone; our ADAS calibration guide covers when that applies.
Do you deliver in Greater Vancouver?
Yes — same-day and next-day across Metro Vancouver and the Fraser Valley, free on orders over $300 after discounts ($500 with a bumper cover). MapleV is an independent supplier, not affiliated with Tesla, Inc.
Do you ship outside British Columbia?
Yes. Ships to any address in Canada by ground courier: about 2 business days to Alberta and Saskatchewan, 3 to Manitoba, 5 to Ontario and Quebec (business days, not counting weekends).