Tesla active grille shutter: which one fits, what comes off, and Tesla's labour time
Updated · Version française

The active grille shutter is a set of louvers clipped to the cooling fan module at the front of the car, with its own electrical connector. On the 2024+ Model 3 and the 2020–2024 Model Y the ambient temperature sensor sits on it.
Tesla allows 0.66 to 0.84 hour to replace it, depending on the car. The 2017–2020 Model 3 and the 2021+ Model 3 take different shutters, and on every car Tesla's procedure calibrates the louvers after a new one goes in. MapleV lists four shutters, CA$69 to CA$379.
Which shutter fits which car
We list one shutter for the 2017–2020 Model 3 (Tesla OE 1076732-00-H) and another for the 2021–2023 and 2024+ Model 3 (1559787-00-A), plus one each for the 2020–2024 and 2025+ Model Y. Match the number on the old shutter before you order.
| Part | Tesla OE number | Fits | MapleV list price |
|---|---|---|---|
| Active Grille Shutter Assembly (aftermarket) | 1076732-00-H | Model 3 (Jun 2017 – 2020) | CA$69 |
| Active Grille Shutter Assembly (aftermarket) | 1559787-00-A | Model 3 (2021 – Dec 2023) · Model 3 Highland (Jan 2024–) | CA$119 |
| Active Grille Shutter (aftermarket) | 1634325-00-A | Model Y (Jan 2020 – Jan 2025) | CA$239 |
| Front Active Grille Shutter (aftermarket) | 1982489-00-D | Model Y Juniper (Feb 2025–) | CA$379 |
What Tesla removes to reach it, and the time
On the 2017–2023 Model 3, the 2024+ Model 3 and the 2020–2024 Model Y, the job goes through the front trunk and under the car. On the 2017–2023 Model 3, Tesla's procedure also removes the rear seat cushion, disconnects the 12 V battery and unplugs the high-voltage controller's logic connector before the cooling fan module comes out.
| Car | Tesla time | What Tesla removes or moves first |
|---|---|---|
| Model 3 (2017–2023) | 0.84 h | Front trunk tub, front aero shield, front valance, cooling fan module |
| Model 3 (2024+) | 0.66 h | Front trunk tub, washer fluid tank (moved aside), ambient temperature sensor, front aero shield, front valance; the cooling fan module is unbolted from the ankle catcher |
| Model Y (2020–2024) | 0.78 h | HEPA filter assembly, front trunk tub, ambient temperature sensor cover, front aero shield, front valance; the cooling fan module is unbolted from the front end carrier |
| Model Y (2025+) | 0.78 h | Removal and refit (0.72 h), then the calibration in Toolbox |
The louver calibration
After a new shutter goes in, Tesla's procedures for all four cars run a louver calibration routine, PROC_VCFRONT_X_LOUVER-CALIBRATION. On the 2017–2023 Model 3, the 2024+ Model 3 and the 2020–2024 Model Y the routine runs from Service Mode or Tesla's Toolbox software; on the 2025+ Model Y the procedure runs it in Toolbox, followed by a heat pump thermal performance test.
Frequently asked
How long does it take to replace a Tesla active grille shutter?
Tesla allows 0.84 hour on the 2017–2023 Model 3, 0.66 hour on the 2024+ Model 3 and 0.78 hour on the 2020–2024 and 2025+ Model Y.
Does a new active grille shutter need calibrating?
Yes. Tesla's procedures for all four cars run a louver calibration routine after the new shutter is fitted: from Service Mode or Toolbox on the 2017–2023 Model 3, the 2024+ Model 3 and the 2020–2024 Model Y, and in Toolbox on the 2025+ Model Y.
Does the 2017–2020 Model 3 use the same shutter as the 2021+ Model 3?
No. We list 1076732-00-H for the 2017–2020 Model 3 and 1559787-00-A for the 2021–2023 and 2024+ Model 3.
Sources
- Tesla Model 3 (2017–2023) Service Manual — Active Grille Shutter (Remove and Replace)
- Tesla Model 3 (2024+) Service Manual — Active Grille Shutter (Remove and Replace)
- Tesla Model Y (2020–2024) Service Manual — Active Grille Shutter (Remove and Replace)
- Tesla Model Y (2025+) Service Manual — Active Grille Shutter (Remove and Replace)