Tesla radiator and cooling fan after a front hit: parts, labour and the coolant refill
Updated · Version française

On the 2017–2023 Model 3 with the heat pump, the radiator clips to the cooling fan and shroud assembly at the front of the car. To change it, Tesla takes the cooling fan module out, removes the active grille shutter and unclips the radiator from the fan and shroud.
Tesla allows 1.26 hours to replace the radiator on the 2017–2023 Model 3 with the heat pump (1.56 without it) and 1.20 hours on the 2020–2024 Model Y, and its 2017–2023 Model 3 manual stresses the coolant vacuum refill when the fan module goes back in. MapleV lists the radiator (Tesla OE 1494175-00-A, CA$259) and the cooling fan and shroud assembly (1607807-00-A, CA$329), both genuine Tesla parts.
The parts we list
The radiator fits the 2021–2023 Model 3 and the 2020–2024 Model Y. The fan and shroud assembly fits the 2021–2023 and 2024+ Model 3 and both Model Y generations; it does not fit the 2017–2020 Model 3.
| Part | Tesla OE number | Fits | MapleV list price |
|---|---|---|---|
| Radiator (Tesla OEM) | 1494175-00-A | Model 3 (2021 – Dec 2023) · Model Y (Jan 2020 – Jan 2025) | CA$259 |
| Cooling Fan and Shroud Assembly (Tesla OEM) | 1607807-00-A | Model 3 (2021 – Dec 2023) · Model 3 Highland (Jan 2024–) · Model Y (Jan 2020 – Jan 2025) · Model Y Juniper (Feb 2025–) | CA$329 |
Tesla's labour times
Each time covers the whole procedure, linked procedures included. The coolant jobs are listed separately in Tesla's manuals.
| Job | Model 3 (2017–2023) | Model Y (2020–2024) |
|---|---|---|
| Radiator, remove and replace | 1.26 with the heat pump, 1.56 without | 1.20 |
| Cooling system, vacuum refill | 0.54 | 0.42 |
| Cooling system, drain and refill | 1.08 | 0.60 (1.38 with the structural pack) |
| Cooling system, check and fill | 0.25 | 0.10 |
The coolant steps in Tesla's procedure
Early in its 2017–2023 Model 3 heat-pump radiator procedure, Tesla starts the Thermal Fill Drain (Coolant Only) routine in Service Mode; the routine has a 5-hour limit. Since September 2026 Tesla's radiator cleaning procedure for the same car, which removes and refits the radiator and which Tesla marks as a draft, carries a caution: make sure the coolant vacuum refill is performed when the cooling fan module is installed.
With the new radiator in, Tesla runs a thermal performance test, and on firmware 2026.14.3 and later a Toolbox routine named PROC_VC_X_RESET-RADIATOR-UA-INDEX.
The parts that come off with it
On the 2017–2023 Model 3 with the heat pump, Tesla removes the cooling fan module and the active grille shutter to reach the radiator. Our guides on the active grille shutter and the ankle catcher cover those parts and their labour times.
Frequently asked
How long does it take to replace a Tesla radiator?
Tesla allows 1.26 hours on the 2017–2023 Model 3 with the heat pump, 1.56 hours without it, and 1.20 hours on the 2020–2024 Model Y.
Does Tesla vacuum-fill the coolant when the radiator comes out?
Tesla's 2017–2023 Model 3 heat-pump radiator cleaning procedure, which removes and refits the radiator, carries a caution to make sure the coolant vacuum refill is performed when the cooling fan module is installed. Tesla's time for a vacuum refill is 0.54 hour on the 2017–2023 Model 3 and 0.42 hour on the 2020–2024 Model Y.
Which radiator fits my Tesla?
The radiator we list (Tesla OE 1494175-00-A) fits the 2021–2023 Model 3 and the 2020–2024 Model Y.
Are MapleV's radiator and cooling fan genuine Tesla parts?
Yes, both are listed as Tesla OEM parts.
Sources
- Tesla Model 3 (2017–2023) Service Manual — 1830 - Cooling System
- Tesla Model 3 (2017–2023) Service Manual — Radiator (Heat Pump) (Remove and Replace)
- Tesla Model 3 (2017–2023) Service Manual — Remove and Clean Radiator (Heat Pump) (Maintenance)
- Tesla Model Y (2020–2024) Service Manual — 1830 - Cooling System