MapleV

Tesla Model 3 & Model Y knuckle replacement after a curb hit: labour and alignment

Updated · Version française

Tesla Model Y front knuckle, left, Tesla OE 2188311-00-A

Each wheel of a Tesla Model 3 or Model Y turns on a knuckle. The hub bearing bolts to it, and the arms and links of the suspension hold it in place; at the front it also carries the steering. This guide sets out what Tesla's manuals say about replacing one after a curb or pothole hit: the parts, the labour time and the alignment.

Tesla allows 0.48 to 1.20 hours to replace one knuckle, depending on the car, the end and the drive. Its alignment tables ask for no alignment after a front knuckle; after one rear knuckle they ask for an EPAS alignment check, after both a four-wheel alignment check.

The knuckles we list

We list front and rear knuckles, left and right, for the 2017–2023 Model 3 and the Model Y. The Model Y front knuckle (2188311-00-A / 2188316-00-A) is also listed for the 2025+ Model Y; the rear knuckles are not, and we list no knuckle for the 2024+ Model 3. Match the number on the knuckle you are replacing before you order.

Tesla knuckles: OE numbers, fitment and MapleV list prices (CAD)
PartTesla OE numberFitsMapleV list price
Front Steering Knuckle - Left (Tesla OEM)1044311-00-EModel 3 (Jun 2017 – Dec 2023)CA$279
Front Steering Knuckle - Right (Tesla OEM)1044316-00-EModel 3 (Jun 2017 – Dec 2023)CA$279
Front Knuckle - Left (Tesla OEM)2188311-00-AModel Y (Jan 2020 – Jan 2025) · Model Y Juniper (Feb 2025–)CA$389
Front Knuckle - Right (Tesla OEM)2188316-00-AModel Y (Jan 2020 – Jan 2025) · Model Y Juniper (Feb 2025–)CA$389
Rear Knuckle - Left (aftermarket)1044411-00-HModel 3 (Jun 2017 – Dec 2023)CA$279
Rear Knuckle - Right (aftermarket)1044416-00-HModel 3 (Jun 2017 – Dec 2023)CA$279
Rear Knuckle - Left (aftermarket)1188411-00-GModel Y (Jan 2020 – Jan 2025)CA$249
Rear Knuckle - Right (aftermarket)1188416-00-GModel Y (Jan 2020 – Jan 2025)CA$249

Tesla's labour time for one knuckle

Tesla gives a flat rate time for each repair, covering the whole procedure for one side. The front knuckle has separate procedures for rear-wheel-drive and dual motor cars. The rear knuckle is the longer job on every car.

In the 2024+ Model 3 manual the front knuckle has two procedures: one marked RWD (0.48 hour) and one without a drive label (0.54 hour), shown in the dual motor column below.

Tesla flat rate times for one knuckle, in hours (left-hand procedures; Tesla service manuals, read November 14, 2026)
CarFront, RWDFront, dual motor / AWDRear
Model 3 (2017–2023)0.540.720.96
Model 3 (2024+)0.480.541.08
Model Y (2020–2024)0.600.721.02
Model Y (2025+)0.540.661.20

Do you need an alignment afterwards?

Tesla's alignment tables give the same knuckle rules in all four manuals, and they treat the two ends differently. A front knuckle needs no alignment, one side or both. A rear knuckle needs an EPAS alignment check after one side and a four-wheel alignment check after both (0.12 and 0.30 hour in the 2017–2023 Model 3 manual). If the car passes the EPAS check, Tesla says no alignment is needed; if it fails, the 2024+ Model 3 manual calls for an alignment and the other three for a four-wheel alignment check.

Since September 2025 Tesla's manuals also say the EPAS check should not be used to check for suspension damage as a result of a collision.

Tesla's alignment requirement after replacing a knuckle (Model 3 and Model Y, all generations)
KnuckleOne sideBoth sides
FrontNoneNone
RearEPAS alignment checkFour-wheel alignment check

What else to check at the same corner

The rear knuckle's upper ball joint has its own procedure in Tesla's 2017–2023 Model 3 and 2020–2024 Model Y manuals (0.56 and 0.58 hour), and the 2017–2023 Model 3 manual has an inspection procedure for it (0.36 hour). Tesla's alignment tables ask for an EPAS alignment check after replacing it.

Our guides on wheel bearings, rear suspension links and sway bar end links cover the parts around the knuckle, with Tesla's times and alignment rules for each.

Frequently asked

Do I need an alignment after replacing a Tesla front knuckle?

No. Tesla's alignment tables list no alignment after a front knuckle on the Model 3 or Model Y, one side or both.

Do I need an alignment after replacing a Tesla rear knuckle?

Tesla asks for an EPAS alignment check after one rear knuckle and a four-wheel alignment check after both. If the car passes the EPAS check, Tesla says no alignment is needed.

How long does it take to replace a Tesla knuckle?

Tesla allows 0.48 to 0.72 hour for a front knuckle and 0.96 to 1.20 hours for a rear one, depending on the car and the drive.

Which knuckles does MapleV list for the Model Y Juniper?

The Model Y front knuckle, 2188311-00-A (left) and 2188316-00-A (right), is listed for the 2020–2024 Model Y and the 2025+ Model Y. We don't list a rear knuckle for the 2025+ Model Y.

Sources