Tesla Model 3 & Model Y sway bar end links: part numbers, labour time and torque
Updated · Version française

A sway bar end link (Tesla calls it a stabilizer bar link) joins the stabilizer bar to the suspension, at the front and at the rear. Each end has a left and a right part. The four we list carry the same Tesla numbers on the 2017–2023 Model 3, the 2024+ Model 3, the 2020–2024 Model Y and the 2025+ Model Y: front 1188391-00-B (left) and 1188396-00-B (right), rear 1044491-00-F (left) and 1044496-00-F (right). Tesla's 2020–2024 Model Y manual warns not to use the Model 3 front links 1044391-00-D / 1044396-00-D on a Model Y; those are not the front links we list.
Tesla allows 0.12 to 0.30 hour to replace one link, depending on the car and the end, and its alignment tables list no alignment for stabilizer bar work. The nuts are not reused: in Tesla's 2017–2023 Model 3 procedures they are replaced, at 98 Nm on the front link and 55 Nm on the rear. MapleV lists the links at CA$49 each.
Which link goes where
On the 2017–2023 Model 3, Tesla's procedures unbolt the front link from the stabilizer bar and the damper, and the rear link, which the 2017–2023 Model 3 and 2020–2024 Model Y manuals call a drop link, from the stabilizer bar and the knuckle. The left and right parts are different numbers at both ends, so order by side as well as by axle.
Before you order, compare the number on the old link.
| Part | Tesla OE number | Fits | MapleV list price |
|---|---|---|---|
| Front Stabilizer Bar Link - Left (aftermarket) | 1188391-00-B | Model 3 (Jun 2017 – Dec 2023) · Model 3 Highland (Jan 2024–) · Model Y (Jan 2020 – Jan 2025) · Model Y Juniper (Feb 2025–) | CA$49 |
| Front Stabilizer Bar Link - Right (aftermarket) | 1188396-00-B | Model 3 (Jun 2017 – Dec 2023) · Model 3 Highland (Jan 2024–) · Model Y (Jan 2020 – Jan 2025) · Model Y Juniper (Feb 2025–) | CA$49 |
| Rear Stabilizer Bar Link - Left (aftermarket) | 1044491-00-F | Model 3 (Jun 2017 – Dec 2023) · Model 3 Highland (Jan 2024–) · Model Y (Jan 2020 – Jan 2025) · Model Y Juniper (Feb 2025–) | CA$49 |
| Rear Stabilizer Bar Link - Right (aftermarket) | 1044496-00-F | Model 3 (Jun 2017 – Dec 2023) · Model 3 Highland (Jan 2024–) · Model Y (Jan 2020 – Jan 2025) · Model Y Juniper (Feb 2025–) | CA$49 |
Tesla's labour time for one link
Tesla gives a flat rate time for each repair, covering the whole procedure for one side. The rear link takes longer than the front on the 2024+ Model 3 and the 2025+ Model Y.
| Car | Front link | Rear link |
|---|---|---|
| Model 3 (2017–2023) | 0.18 | 0.18 |
| Model 3 (2024+) | 0.12 | 0.30 |
| Model Y (2020–2024) | 0.18 | 0.18 |
| Model Y (2025+) | 0.25 | 0.30 |
Torque and new nuts
In Tesla's 2017–2023 Model 3 procedures, the front link's nuts at the stabilizer bar and the damper are discarded and replaced with new nyloc nuts, tightened to 98 Nm. The rear link's nuts at the stabilizer bar and the knuckle are also replaced, at 55 Nm, with a 5 mm hex and 15 mm tools in Tesla's tool list; Tesla's 2024+ Model 3 and 2025+ Model Y procedures counter-hold the ball joint with a 5 mm hex wrench. Tesla's 2024+ Model 3 manual uses the same 55 Nm, with a new nut, where the rear stabilizer bar meets its links.
Tesla's front link procedure adds a caution for collision repairs: check the Collision Repair Manual to see whether the steering gear must be replaced as well.
Do you need an alignment afterwards?
No, by Tesla's tables. The alignment tables in all four manuals list the stabilizer bar, front and rear, as needing no alignment, one side or both, and they don't list the links separately. If the link was changed because of a curb or pothole hit, the parts around it are a different matter: see our knuckle guide for what Tesla asks after those.
Frequently asked
Are Tesla Model 3 and Model Y sway bar end links the same?
The four we list are: front 1188391-00-B and 1188396-00-B, rear 1044491-00-F and 1044496-00-F, on the 2017–2023 and 2024+ Model 3 and the 2020–2024 and 2025+ Model Y.
How long does it take to replace a Tesla sway bar end link?
Tesla allows 0.18 hour for either link on the 2017–2023 Model 3 and the 2020–2024 Model Y, 0.12 (front) and 0.30 (rear) on the 2024+ Model 3, and 0.25 (front) and 0.30 (rear) on the 2025+ Model Y.
Do I need an alignment after replacing a sway bar end link?
No. Tesla's alignment tables list no alignment for stabilizer bar work, front or rear, on the Model 3 and Model Y.
Can I reuse the nuts on a Tesla sway bar end link?
Tesla replaces them. On the 2017–2023 Model 3 the front link's nyloc nuts go to 98 Nm and the rear link's nuts to 55 Nm.
Are the left and right end links different?
Yes, at both ends: 1188391-00-B and 1188396-00-B at the front, 1044491-00-F and 1044496-00-F at the rear.
Sources
- Tesla Model 3 (2017–2023) Service Manual — Link - Stabilizer Bar - Front - LH (Remove and Replace)
- Tesla Model 3 (2017–2023) Service Manual — Drop Link - Stabilizer Bar - Rear - LH (Remove and Replace)
- Tesla Model Y (2020–2024) Service Manual — Link - Stabilizer Bar - Front - LH (Remove and Replace)
- Tesla Model Y (2020–2024) Service Manual — Drop Link - Stabilizer Bar - Rear - LH (Remove and Replace)
- Tesla Model 3 (2024+) Service Manual — Link - Stabilizer Bar - Front - LH (Remove and Replace)
- Tesla Model 3 (2024+) Service Manual — Link - Stabilizer Bar - Rear - LH (Remove and Replace)
- Tesla Model 3 (2024+) Service Manual — Stabilizer Bar - Rear (Remove and Replace)
- Tesla Model Y (2025+) Service Manual — Front Stabilizer Link - LH (Remove and Replace)
- Tesla Model Y (2025+) Service Manual — Stabilizer Bar Link - Rear - LH (Remove and Replace)
- Tesla Model 3 (2017–2023) Service Manual — Alignment Requirement - Suspension
- Tesla Model 3 (2024+) Service Manual — Alignment Requirement - Suspension
- Tesla Model Y (2020–2024) Service Manual — Alignment Requirement - Suspension
- Tesla Model Y (2025+) Service Manual — Alignment Requirement - Suspension